PODOLIT XP
coating for protection and decoration of concrete floors in workshops, warehouses, industrial plants, garage stations, technical rooms

Application:
PODOLIT XP is a special coating designed on the basis of polyurethane or epoxi resins, additives, mechanically firm fillers, pigments sustaining lights and it is used for protection and decoration of concrete floor surfaces in rooms with very demanding use conditions and high mechanical load, where work is conducted with chemically aggressive substances, oil derivatives, engine lubricants, gasoline, solvents, acids and alkali, detergents, disinfectants.

It can be cleaned and washed under pressure of 150 bar.
PODOLIT XP TOP-COD is applied in extreme use conditions creating special glazed layer which is more resistant to the stated characteristics.

Surface preparation:
PODOLIT XP is smared over firm, dry, greaseless, dustless concrete surface or glaze. Make sure cement remains are removed from the surface.

Application:
PODOLIT XP is applied with roller, brush or syringe. Before application of PODOLIT XP it is necessary to apply PODOLIT XP PRAJMER.
PODOLIT XP is applied in two or three layers appropriately diluted in accordance with working conditions (temperature and moisture). The first layer is more diluted due to deeper penetration into the surface. It is diluted with PODOLIT SOLVENT.

PODOLIT XP is delivered in gray or red color. It is possible to provide it in a special shade, according to customers’ wishes.

Working conditions:
PODOLIT XP is flamable. Work is to be conducted in airy rooms. Usual protection equipment is to be used during work.
PODOLIT XP is applied at temperature between +10ºC and +35ºC. Temperature between +15ºC and + 30ºC is recommended.

Consumption:
Quantity of PODOLIT XP depends on smoothness and porosity of the surface. It ranges between 2,5 – 3,5 m²/lit in two layers.

Packaging:
PODOLIT XP is delivered in metal packaging.

Time of application:
Time interval between the applications of two layers is 8-24 h, depending on temperature and moisture.

Storage: In original packaging in dry and airy space, protected from the sun and direct source of heat. Product is to be kept away from children. Lifetime: 12 months if properly stored in its original packaging.

Note:
Instructions are given on the basis of research and experience with the purpose of reaching product’s maximal usability in application and protection at work and without legal obligation.
For further information contact our application service.